Part Number Hot Search : 
0C862U07 ZR36505 01M10 2SK749 SM70T 60201 C143XF HCF4032
Product Description
Full Text Search
 

To Download TDA7377 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  unisonic technologies co., ltd TDA7377 linear integrated circuit www.unisonic.com.tw 1 of 8 copyright ? 2011 unisonic technologies co., ltd qw-r107-064.a 2 x 30w dual/quad power amplifier for car radio ? description the utc TDA7377 is a class ab car radio amplifier for car radio, it can work either in dual bridge or quad single ended configuration. the exclusive fully complementar y structure of the output stage and the internally fixed gain guarantees the highest possible power performances with few external components. the on-board clip detector simplifies gain compression operation. the fault diagnostics makes it possible to detect mistakes during car radio set assembly and wiring in the car. ? features * high output power@vcc=14.4v, f=1khz rl=4 ? : ? 2 x 35w max. ? 2 x 20w@thd= 10% ? 4 x 6 w @10% ? 4 x 10w / 2 ? @10% ? 2 x 30w / eiaj@vcc=13.7v rl=4 ? * cmos compatible stand-by function (low icc) * no audible pop during st-by operations * internally fixed gain (26db btl and 20db single ended) * no bootstrap capacitors and boucherot cells * diagnostics facility on pin10 when output clipping, shorted to vcc or gnd, thermal shutdown and soft short at turn on. * rail to rail output swing * absolute stability without any external compensation. hzip-15d ? protections * load dump voltages surge * reversed battery * output dc short circuit protecttion with low current when shorted to gnd or vcc. * output ac short circuit protection: across the load * silent turn on/off * thermal shutdown * load very inductive speakers * fortuitous open gnd * esd ? ordering information ordering number lead free halogen free package packing TDA7377l-j15-d-t TDA7377g-j15-d-t hzip-15d tube TDA7377l-j15-d-t (1) packing type (2) package type (3) lead free (1) t: tube (2) j15-d: hzip-15d (3) g: halogen free, l: lead free
TDA7377 linear integrated circuit unisonic technologies co., ltd 2 of 8 www.unisonic.com.tw qw-r107-064.a ? pin connection ? block diagram 2 15 14 10 9 8 6 11 12 5 7 4 13 3 1 v cc v cc in 1 st - by in 2 in 3 in 4 pw - gnd svr s - gnd out 2 out 1 out 3 out 4 diagnostics + - + - + - + - a3 a2 1nv a4 1nv a1
TDA7377 linear integrated circuit unisonic technologies co., ltd 3 of 8 www.unisonic.com.tw qw-r107-064.a ? absolute maximum ratings parameter symbol ratings unit operating supply voltage v op 18 v dc supply voltage v s 28 v peak supply voltage (for t = 50ms) v s(peak) 50 v not repetitive t = 100s 4.5 a output peak current repetitive f > 10hz i o(peak) 3.5 a power dissipation (t c = 85c) p d 36 w junction temperature t j +150 c storage temperature t stg -40~+150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal data parameter symbol ratings unit junction to case jc 1.8 c/w ? electrical characteristics (v s = 14.4v; r l = 4 ? ; f = 1 khz; ta =25c, unless otherwise specified) parameter symbol test conditions min typ max unit supply voltage range v s 8 18 v in v i(st-by) 1.5 st-by threshold voltage out v o(st-by) 3.5 v voltage saturation on pin 10 v sat sink current at pin 10 = 1ma 0.7 v output offset voltage v o(off) 150 mv non inverting channels 2 rg = 0; s.e. ?a? weighted, inverting channels 5 v input noise voltage en bridge, rg = 0; 22hz ~ 22khz 3.5 v total quiescent drain current i q r l = 150 ma max driving current under fault 5 ma st-by pin current(pin 7) i st-by play mode vpin7 = 5v 50 a st-by current consumption i st-by v st-by = 0 ~ 1.5v 100 a off i cd(off) d = 1% (note 2) 90 a clipping detector output average current on i cd(on) d = 5% (note 2) 160 a single ended 20 30 input impedance r in bridge 10 15 k ? bridge 18 20 single ended 5.5 6 output power p out thd = 10%; r l = 4 ? single ended, r l = 2 ? 10 w max p o(max) v s = 14.4v, bridge 31 35 w output power (note 3) eiaj p o(eiaj) v s = 13.7v, bridge 27 30 w single ended, p out =0.1~4w 0.02 distortion thd r l = 4 ? bridge, p out = 0.1 ~ 10w 0.03 0.3 % f = 1khz single ended f = 10khz single ended 70 60 db db cross talk ct f = 1khz bridge f = 10khz bridge 55 60 db db single ended 19 20 21 db voltage gain g v bridge 25 26 27 db voltage gain match g v 0.5 db supply voltage rejection svr rg = 0; f = 300hz 50 db stand-by attenuation a st-by p o = 1w 80 90 db note: 1. see built-in s/c protection description 2. pin 10 pulled-up to 5v with 10k ? ; r l = 4 ? 3. saturated square wave output.
TDA7377 linear integrated circuit unisonic technologies co., ltd 4 of 8 www.unisonic.com.tw qw-r107-064.a ? typical test and application circuit
TDA7377 linear integrated circuit unisonic technologies co., ltd 5 of 8 www.unisonic.com.tw qw-r107-064.a diagnostics 1000 f 100nf 10 f 0.22 f 0.22 f 47 f out r out l in l in l st-by 10k v s 1 2 15 14 10 3 13 7 4 5 12 11 6 89 0.47 f out bridge in bridge 2200 f 2200 f figure 3. stereo/bridge
TDA7377 linear integrated circuit unisonic technologies co., ltd 6 of 8 www.unisonic.com.tw qw-r107-064.a ? typical application information diagnostics facility note: utc TDA7377 built in a diagnostic circuitry, when following events appearing: clipping in the output signal, thermal shutdown, and output fault including short to gnd, short to v s and soft short at turn on. when the event is detected, the informa tion is available across an open collector output (pin 10) through a current sinking (see fig 4).the current sinking at pin 10 is triggered when a certain distortion leve l is reached at any of the outputs. this function allows gain compression possibility wh enever the amplifier is over driven. the current sinking at pin 10 also can be triggered when the ic?s operating temperature raise to about 10c before the shutdown threshold. normally the clip detector signaling produces a low level at pin 10 that is shorter than that present under faulty conditions; this can be used to discriminate each event (clipping detection, output fault, thermal proximity). utc TDA7377 10 r v ref v pin 10 figure 4. pin10 diagnostic circuitry -
TDA7377 linear integrated circuit unisonic technologies co., ltd 7 of 8 www.unisonic.com.tw qw-r107-064.a ? typical characteristics
TDA7377 linear integrated circuit unisonic technologies co., ltd 8 of 8 www.unisonic.com.tw qw-r107-064.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.


▲Up To Search▲   

 
Price & Availability of TDA7377

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X